Vodavi STARPLUS Triad-S Manual page 242

2-216
Chapter 2 - Features and Operation
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
S TAT IO N AT T R IB UT E S
S E L E CT A S TATI O N R A N G E
2. Enter the range of fixed station numbers (100-131) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
4. Press button #21. The display updates to reflect current programming for Page C.
X XX - X X X PAG E C
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
5. Press the SYS BIN RANGE button (Button #6). The following message displays:
6. Enter a range of speed bins to be allowed (100-999). The leading digit 9 is not reflected on
the LCD and is not used for your entry.
7. Press HOLD to save the entry.
Flash 50 - Fixed Numbers
If HOLD is pressed without entering a station range, ALL stations are selected.
Flash 50 - Fixed Numbers
Flash 50 - Fixed Numbers
S YS B I N R A NG E
# ##- ###
Flash 51 - Flexible Numbers
E N T E R S TAT IO N N U M B E R
Flash 51 - Flexible Numbers
S X X X PAG E A
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
Flash 51 - Flexible Numbers
S X X X PAG E C
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
100 -9 99
Speed Dial