System Speed Dial Access - Vodavi STARPLUS Triad-S Manual

2-214
Chapter 2 - Features and Operation
To store speed dial numbers:
1. Lift handset.
2. Dial [661] on the dial pad.
3. Dial desired station speed number (9000-9019).
4. Dial telephone number to store.
5. Briefly press and release the hookswitch. A confirmation tone sounds.

System Speed Dial Access

Description
Stations can be individually allowed or denied the ability to use system speed dial numbers
(9020-9099, or 9020-9999 with memory expansion unit). (System speed numbers 9060-9099
are not monitored by toll restriction.) Stations cannot be prevented from using station speed
dial.
The first programmed attendant must enter the System Speed numbers. If an attendant was
not specified, system speed numbers are entered at Station 100.
Use Flash 50 programming when you want to modify a range of stations' attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station's attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
S TAT IO N AT T R IB UT E S
S E L E CT A S TATI O N R A N G E
2. Enter the range of fixed station numbers (100-131) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
Line Group 1 is programmed along with SLT speed numbers, and thus Line Group 1
is used when activating station speed dial from an SLT.
Flash 50 - Fixed Numbers
If HOLD is pressed without entering a station range, ALL stations are selected.
Flash 51 - Flexible Numbers
E N T E R S TAT IO N N U M B E R
Speed Dial