Night Service - Vodavi STARPLUS Triad-S Manual

2-176
Chapter 2 - Features and Operation
To program a name into the translation table:
1. Press the NAME flexible button (FLASH 55, Button #3) to enter the desired name into
the translation table. Maximum length is 24 characters. (Refer to
for dial pad keys.)
2. Press HOLD to update the database. The BACK SPACE flexible button (FLASH 55,
Button #5) erases the current letter for error correction.
To erase a current phone number/name entry:
Press the CLEAR ENTRY flexible button (FLASH 55, Button #4) to clear an entire phone
number and name from the current index.
Press the NEXT TABLE flexible button (FLASH 55, Button #18) to advance to the next
index and continue entering information into the translation table.
Press the PREV TABLE flexible button (FLASH 55, Button #19) to return to a previous
index that is already programmed.
To locate an existing index for editing:
1. Press the TABLE NUMBER flexible button (FLASH 55, Button #20). The following
message displays:
2. Enter a valid number that corresponds to the table numbers 600-799.
3. Press HOLD to complete the entry.

Night Service

Description
The Triad-S
programmable weekly time schedule lets the system administrator preset the time the
system goes into night mode, and the time night mode is removed on a daily basis, including
weekend operation.
The Attendant Night Service feature [631] provides a means to put the system in night mode
from any keyset or remove the system from night mode from any keyset as long as the
system was put in night mode by the NIGHT SERVICE flexible button [604]. If the system was
placed in night mode by the Attendant using the DND button or if the system was placed in
night mode by the automatic schedule, the NIGHT SERVICE flexible button cannot remove
the system from night mode.
E N T E R TA B LE N U M B E R
can be programmed so it is automatically placed into and out of night mode. A
Night Service
Figure 2-4 on page 2-68