Vodavi STARPLUS Triad-S Manual page 50

2-24
Chapter 2 - Features and Operation
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
S TAT IO N AT T R IB UT E S
S E L E CT A S TATI O N R A N G E
2. Enter the range of fixed station numbers (100-131) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
4. Press the CALL FORWARD flexible button (Button #10). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ...Call Forwarding is enabled at all stations.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
»
Call Forward remains engaged until manually released. When released, the station
number is returned to the LCD.
Flash 50 - Fixed Numbers
If HOLD is pressed without entering a station range, ALL stations are selected.
Flash 50 - Fixed Numbers
CA LL F O R WAR D
E N A B LE D
Flash 51 - Flexible Numbers
E N T E R S TAT IO N N U M B E R
Flash 51 - Flexible Numbers
S X X X PAG E A
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
0-1
Call Forward