Vodavi STARPLUS Triad-S Manual page 352

4-28
Chapter 4 - Call Distribution - ACD/UCD
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
S TAT IO N AT T R IB UT E S
S E L E CT A S TATI O N R A N G E
2. Enter the range of fixed station numbers (100-351) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
4. Press the SUPV BARGE-IN flexible button (Button #12). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... Supervisor Monitor with Barge-In feature is disabled.
Flash 50 - Fixed Numbers
If HOLD is pressed without entering a station range, ALL stations are selected.
Flash 50 - Fixed Numbers
AC D S U P V B A R GE I N
D I S A B LE D
Automatic Call Distribution
Flash 51 - Flexible Numbers
E N T E R S TAT IO N N U M B E R
Flash 51 - Flexible Numbers
S X X X PAG E A
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
0-1