Vodavi STARPLUS Triad-S Manual page 48

2-22
Chapter 2 - Features and Operation
Once the button is assigned on the station and a call rings in:
1. The coverage station receives audible and/or visual indications for the coverage station
after a programmable period of time. The ring tone is the internal ring tone cadence. The
flash rate is the same as the incoming CO line ringing rate.
2. The Coverage station user then presses their flashing COVERAGE flexible button,
-or-
Presses the ON/OFF button (only if the ringing option is selected).
The call is answered and ceases to ring at any other stations that may have the same
coverage appearance. One of the following messages display after the call is answered.
Non-network system or in same Node:
Network system with call passed across a switch:
SINGLE LINE TELEPHONE
This feature can cover SLT extensions, however an SLT cannot perform the call coverage
function. The SLT extension need not be physically installed, only the SLT card must be
installed.
Conditions
»
Direct CO calls have ring and LCD priority over call coverage calls. The call coverage
station must have a direct CO appearance or Loop button to pick up an external call. If the
call coverage station is in DND, no audible ringing occurs, however visual and LCD
information is presented.
»
This feature can be programmed on any key station or DSS Console with an available
flexible button. If the DSS with a call coverage button assigned is unplugged or moved,
the station associated with that DSS stops ringing until the DSS is plugged in again.
»
Only one button type (646 or 647) per covered station can be assigned on a keyset.
Ringing option = ringing, flashing Call Coverage LED, LCD display as in following
illustration.
CA LL F O R S TA XX X X
MM M D D Y Y
Non-Ringing option = flashing Call Coverage LED only (no ringing or change to LCD).
CA LL F O R S TA XX X X
F R OM S TA Y Y Y Y
XX X X X X XX X C AL LI NG
Y Y Y Y Y Y
XXXXXXXXX = Name of calling party
YYYYYY = Specific CO Line type being used (e.g., PRI #23)
HH:MM:SS = Amount of time on the call
H H : M M a m
H H : M M a m
H H :MM:S S
Call Coverage