Day Of Week Programming; Automatic Night Mode Operation; External Night Ringing; Manual Operation - Vodavi STARPLUS Triad-S Manual
Hide thumbs
Also See for STARPLUS Triad-S:
- Product description manual (402 pages) ,
- System programming manual (376 pages) ,
- Installation manual (78 pages)
Table of Contents
Advertisement
2-178
Chapter 2 - Features and Operation
3. If no other changes must be made, press HOLD to save the entry. A confirmation tone
sounds.
Day of Week Programming
Programming Steps
The MONDAY flexible button (Button #2) LED is lit. To change days of the week:
1. Press the appropriate DAY OF WEEK flexible button (FLASH 22, Buttons 2-8).
2. Enter a valid number to indicate the hour and minutes to end night mode.
3. Press HOLD to save the entry. (Example: 07301830 [HOLD]) A confirmation tone sounds
and the display updates.
Automatic Night Mode Operation
The
Triad-S
Automatic Night Mode. The Attendant(s) can override the Automatic Night Mode schedule
simply by pressing the NIGHT (DND) button [631].
External Night Ringing
The system can be programmed so that CO lines marked for UNA rings on the external page
speakers. Refer to
Manual Operation
The Attendant(s) can control the use of Night Mode manually by pressing the NIGHT (DND)
button [631]. An LED indicates when the system is in Night Mode operation (flashing =
Special Mode, off = Day Mode).
Night Class of Service (COS)
The system allows each station to be assigned a different COS for night operation. The night
COS goes into effect when the system is put into night mode manually or via the automatic
schedule. Prevents the misuse of phones after hours.
Night Ringing Assignments
Each CO line may be individually programmed for Night Ringing to other stations, to
Hunt/ACD/UCD/Voice Mail groups, or off-net via Speed Dial. When the system is placed into
night mode, manually or automatically, ringing follows the Night Ringing Assignments for
each CO line.
Universal Night Answer (UNA)
Incoming CO lines can be programmed for Universal Night Answer (UNA). Stations that do
not have access to a line during the day can answer that line while the system is in the Night
Mode by dialing a UNA code. Refer to
Once enabled, this feature addresses the entire week.
can be programmed in database administration to place the system into
"Universal Day/Night Answer" on page
2-251.
"Universal Night Answer (UNA)" on page
Night Service
2-178.
Advertisement
Table of Contents
