Exclusive Hold Flash Rate; Exclusive Hold Recall Timer - Vodavi STARPLUS Triad-S Manual

Hold - Exclusive

Exclusive Hold Flash Rate

Description
The Exclusive Hold flash rate is the rate at which a CO Line button or Loop button flashes
when a call is placed on Exclusive Hold. This flash rate can be programmed to 29 different
options identified in the flash rate table. This enables the programmer to customize the key
system configuration to desired flash rates.
Programming Steps
1. Press the EXCLUSIVE HOLD flexible button (FLASH 07, Button #12). The following
message displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options. (Refer to
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Exclusive Hold flash rate is set for a Green 120 ipm Flash (24).

Exclusive Hold Recall Timer

Description
The System Hold Recall Timer determines the time before a call placed on Exclusive Hold
recalls the station placing the Hold. If unanswered by that station, the call recalls the
attendant.
The Exclusive Hold Recall Timer setting is variable from 000-300 seconds. An entry of 000
disables the timer and there is no recall.
Programming Steps
1. Press the EXCLUSIVE HOLD RECALL TIMER flexible button (FLASH 01, Button #2). The
following message displays:
2. Enter a valid number on the dial pad that corresponds to 000-300 seconds.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Exclusive Hold Recall Timer is set for 180 seconds.
E XCLU S I V E H OL D
GR E E N 1 2 0 IP M F L AS H
Table 2-11 on page
E XC H OL D R E CA LL
18 0
00-28
2-130.)
000 -3 00
Chapter 2 - Features and Operation
2-143