ICLID Programming
Local Name Translation
Description
An administrable table provides a local translation from a received calling number to a name.
This table can be administered by the customer from the attendant console location. In cases
of conflict between the name delivered from the CO and that in the local translation table,
the local translation table shall rule. 200 entries are provided.
ICLID Programming
Description
The
Triad-S
When ICLID is desired, the following system-wide parameters determine how the ICLID
information is distributed.
Programming Steps
1. Press FLASH and dial [56]. The following message displays:
2. To program ICLID features, use the flexible button(s) as defined in the following
procedures.
Button # 1 = Disable/Enable
Button # 2 = Name In Display
Button # 3 = Baud Rate Display
Button # 4 = Port Assignment
3. After all entries are made, press HOLD to accept the data.
When entering the ICLID features programming area the buttons on the digital telephone are
defined as shown below:
ENABLE /
DISABLE
✺
system can provide ICLID input on the RS-232C connector of the optional MISB.
IC LI D NA M E B AU D P OR T
NO
Y E S
NAME
1
Q
2
✺
9 6 0 0
1
BAUD
RATE
W
3
✺
Chapter - ICLID / Caller ID
PORT
E
4
R
✺
A-7