Co Line - Access - Vodavi STARPLUS Triad-S Manual

CO Line - Access

6. Enter a valid number on the dial pad (1-7) corresponding to one of seven possible Classes
of Service to which a station may be assigned.
The seven Classes of Service are:
[1] = COS 1; No restrictions.
[2] = COS 2; Table A governs
[3] = COS 3; Table B governs
[4] = COS 4; Table A and B govern
[5] = COS 5; Restricts [0], [1], [
[6] = COS 6; Intercom Only (no CO line access - results in a 911 block (unless 911 Feature is
[7] = COS 7; Restricts [0], [1], [
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... All stations are assigned a COS 1 for Night Mode.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
CO Line - Access
Description
Through programming, telephones are allowed or denied access to particular outside lines or
line groups. Refer to
and "CO Line Group Programming" on page
Operation
To access an outside line:
1. Press idle CO line button, POOL button,
-or-
Dial CO line group access code or LCR code: 9, 801-823, 88+LLL (LLL = CO Line number).
2. Dial desired number for outside call.
3. Lift handset to converse or use speakerphone.
SINGLE LINE TELEPHONE
To access an outside line:
1. Lift the handset.
2. Dial access code: 9, 801-823, 88+LLL (LLL = CO line number).
3. Dial telephone number.
] , [#] dialed as first-digit and places a 7-digit maximum.
✳
active)
] , [#] dialed as first-digit with a 10-digit maximum.
✳
"Line Group Access - Station" on page
Chapter 2 - Features and Operation
2-64, "Flexible Button" on page
2-66.
2-59
2-131,