Voice Mail In-Band Digits; Voice Mail Transfer / Forward - Vodavi STARPLUS Triad-S Manual

Voice Mail In-Band Features
Programming Steps
Press FLASH and dial [67]. The following message displays:

Voice Mail In-Band Digits

Description
The Voice Mail In-Band Digits feature enables and disables station in-band signaling.
Incoming CO callers can be Station Call Forwarded into voice mail only when the ringing CO
line is programmed to ring at one station. CO lines programmed to ring at an Attendant
station, call forward into the voice mail system (if programmed to ring only at one Attendant
station). Callers are presented to the main greeting (not the Attendant station's mail box)
even when ID digits are enabled.
Programming Steps
1. Press the IN-BAND DIGS CO CALL flexible button (FLASH 67, Button #1). The following
message displays.
2. Enter a 0 or 1 to Enable/Disable this feature.
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... ID Digits for incoming CO calls is enabled.

Voice Mail Transfer / Forward

Description
The Voice Mail Transfer/Forward feature forwards voice mail calls, upon reaching a forwarded
to VM station, back into the voice mail unit. It is useful when VM ports are being used as both
Auto Attendant and VM ports. This feature can be enabled/disabled for all VM groups.
Programming Steps
1. Press the FORWARD TO VM GROUPS flexible button (FLASH 67, Button #2). The
following message displays:
V M FE AT U R E S
E N T E R B U T TO N N U M B E R
I N- B AN D D IG S CO C AL L
E N A B LE D
F O R WA RD TO V M G R OU P S
E N A B LE D
Chapter 2 - Features and Operation
0-1
0-1
2-267