System Speed Bin Access - Vodavi STARPLUS Triad-S Manual

Speed Dial
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
4. Press the SPEED flexible button (Button #6). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... System Speed Dialing is enabled at all stations.
Operation
The first programmed attendant uses the same procedures to store system speed dial
numbers, program multiple speed dial numbers, and to erase existing speed bins as
described in the operation of station speed dial numbers.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.

System Speed Bin Access

Description
The System Speed Bin Access feature has 900 entries available. A station can be allowed or
denied access to bins 9100-9999. Access to system speed bins 9020-9099 can not be
restricted. Stations are granted the ability to dial all Speed Dial Numbers within the specified
range.
Use Flash 50 programming when you want to modify a range of stations' attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station's attributes using a flexible station
number.
Flash 50 - Fixed Numbers
S Y S T E M S PE E D
E N A B LE D
Chapter 2 - Features and Operation
Flash 51 - Flexible Numbers
S X X X PAG E A
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
0 - 1
2-215