Message Callback - Dss / Blf Flash Rate; Call Coverage - Vodavi STARPLUS Triad-S Manual

Hide thumbs Also See for STARPLUS Triad-S:
Table of Contents

Advertisement

Call Coverage

Message Callback - DSS / BLF Flash Rate

Description
The Message Call Back DSS/BLF flash rate is the rate at which a DSS button of a station
returning your message flashes. This flash rate can be programmed to 29 different options
identified in the flash rate table. This enables the programmer to customize the key system
configuration to desired flash rates.
Programming Steps
1. Press the MSG CBCK / DSS/BLF flexible button (FLASH 07, Button #5). The following
message displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options. (Refer to
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Message Callback DSS/BLF flash rate is set for a Red 120 ipm Flutter (11).
Call Coverage
Description
The Call Coverage feature provides the functionality for stations to answer calls for other
stations by utilizing call coverage buttons. Visual and Audible status of ringing stations to an
assigned coverage station are provided. Multiple coverage stations can have the same
remote ringing station(s) programmed on their stations. Once a coverage station answers the
call, other stations attempting to answer the call receive a busy tone and the call coverage
button extinguishes on all appearances of that button.
Direct CO calls have ring and LCD priority over call coverage calls. The call coverage station
must have a direct CO appearance or Loop button in order to pick up an external call. If the
call coverage station is in DND, no audible ringing occurs, however visual and LCD
information is presented.
This feature can be programmed by the station user or through admin programming.
DEFAULT ... No call coverage buttons are assigned.
Operation
To assign a Call Coverage Button:
1. Press [SPEED] + [SPEED].
2. Press a desired flexible button.
3. Dial [647] for Non-Ringing or [646] for Ringing, followed by the station number to cover. A
confirmation tone sounds.
M S G CB CK / D S S / B L F
R E D 1 2 0 IP M F LU T T E R
Table 2-11 on page
0 0-28
2-130.)
Chapter 2 - Features and Operation
2-21

Advertisement

Table of Contents
loading

Table of Contents