Import The Settings; Restore Default Settings - Epson DS-790WN Administrator's Manual

Maintenance
>

Restore Default Settings

4. Click Export.
Important:
c
If you want to export the scanner's network settings such as the device name and IPv6 address, select Enable to
select the individual settings of device and select more items. Only use the selected values for the replacement
scanner.
Related Information
"Running Web Config on a Web Browser" on page 34
&

Import the settings

Import the exported Web Config file to the scanner.
Important:
c
When importing values that include individual information such as a scanner name or IP address, make sure the
same IP address does not exist on the same network.
1. Access Web Config, and then select the Device Management tab > Export and Import Setting Value >
Import.
2. Select the exported file, and then enter the encrypted password.
3. Click Next.
4. Select the settings that you want to import, and then click Next.
5. Click OK.
The settings are applied to the scanner.
Related Information
"Running Web Config on a Web Browser" on page 34
&

Restore Default Settings

On the control panel, select Settings > System Administration > Restore Default Settings, and then select the
items you want to restore to their defaults.
❏ Network Settings: Restore network related settings to their initial status.
❏ All Except Network Settings: Restore other settings to their initial status except for network related settings.
❏ All Settings: Restore all settings to their initial status when purchased.
161