Various Scanning Settings For Document Capture Pro (For Windows Only) - Epson DS-770 II User Manual

Advanced Scanning
Automatic Feeding Mode starts.
The light on the scanner turns on, and the Automatic Feeding Mode window is displayed on your
computer.
5. Adjust the edge guides, and then place the original in the ADF.
Scanning starts automatically.
6. After scanning stops, place the next original in the ADF.
Repeat this procedure until you have scanned all originals.
Note:
❏ If you want to scan originals that are detected as double feeds, for example plastic cards or envelopes, press the
(Double Feed Detection Skip) button before placing the original to skip double feed detection.
❏ If you want to scan originals that are likely to jam, for example thin paper, press the
placing the original to slow down the scanning speed.
7. After you have scanned all originals, close Automatic Feeding Mode.
Press the button on the scanner or press Finish on the Automatic Feeding Mode window displayed on
your computer.
Note:
You can make timeout settings to finish Automatic Feeding Mode.
Select Settings on the Document Source list to open the Document Source Settings window. Set Automatic Feeding
Mode Timeout (seconds) on the window.
The scanned image is saved to the folder you specified.
Related Information
"Placing Originals" on page 33
&
Various Scanning Settings for Document Capture Pro
(for Windows Only)
Document Capture Pro allows you to easily scan and save documents such as official reports and forms, by using
the optimum settings to suit your needs. This section explains how to make settings for jobs that use convenient
functions such as sorting.
Note:
This chapter explains the Document Capture Pro feature on Windows. When you using Document Capture on Mac OS, see
the software help for details.
>

Various Scanning Settings for Document Capture Pro (for Windows Only)

92
(Slow Mode) button before