Advanced Security Settings
Protocol
SNMPv1/v2c Settings
SNMPv3 Settings
Protocol Setting Items
Bonjour Settings
Items
Use Bonjour
Bonjour Name
Bonjour Service Name
Location
Wide-Area Bonjour
SLP Settings
Items
Enable SLP
WSD Settings
Items
Enable WSD
Scanning Timeout (sec)
Device Name
Location
LLTD Settings
Items
Enable LLTD
Device Name
LLMNR Settings
>
Controlling Using Protocols
Description
You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices,
monitoring, and so on.
You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices,
monitoring, etc.
>
Protocol Setting Items
Setting value and Description
Select this to search for or use devices through Bonjour.
Displays the Bonjour name.
Displays the Bonjour service name.
Displays the Bonjour location name.
Set whether to use Wide-Area Bonjour.
Setting value and Description
Select this to enable the SLP function.
This is used such as network searching in EpsonNet Config.
Setting value and Description
Select this to enable adding devices using WSD and scan
from the WSD port.
Enter the communication timeout value for WSD scanning
between 3 to 3,600 seconds.
Displays the WSD device name.
Displays the WSD location name.
Setting value and Description
Select this to enable LLTD. The scanner is displayed in the
Windows network map.
Displays the LLTD device name.
92