Epson DS-790WN Administrator's Manual page 134

Authentication Settings
5. Edit and save this CSV file in a spreadsheet application such as Microsoft Excel or in a text editor.
Important:
c
When editing the file, do not change the encoding and header information.
CSV File Setting Items
Item
UserID
UserName
Password
AuthenticationCardID
IDNumber
Department
MailAddress
FolderProtocol
FolderPath
FolderUserName
FolderPassword
FtpPassive
>
Registering and Setting Information
Settings and Explanation
Enter the user ID to use authentication between 1 and 83 bytes in Unicode.
Enter the user name displayed on the scanner's control panel within 32 characters in
Unicode. You can leave this blank.
Enter the password to use for authentication within 32 characters in ASCII. When
importing, this is set as the password instead of EncPassword.
Leave this blank if you select User ID for How to Authenticate User.
When exporting, this is always blank.
Set the reading result of Authenticate card. When you permit Allow users to register
authentication cards in Authentication Settings, the result registered by users is
reflected.
Enter within 116 characters in ASCII. You can leave this blank.
This item is displayed when Card or ID Number or ID Number is selected in
Authentication Settings > How to Authenticate User.
Enter a number that falls somewhere between the number set in Authentication
Settings > The Minimum Digit Number of ID Number and is up to 8 digits.
An ID Number cannot be duplicated. If it is duplicated, you will be alerted to the error
when importing the file. When left blank, it is automatically assigned a number.
Enter the department name arbitrary to distinguish the users.
Enter within 40 characters in Unicode. You can leave this blank.
Set the email address for the users. This is used as the destination for Scan to My
Email.
You can use A-Z, a-z, 0-9, !#'%&'*+-./=?^_{|}~@. Enter 200 characters or less. You cannot
use "," (comma) for the first character. You can leave this blank.
Set the type of Scan to My Folder function.
Network Folder/FTP (SMB): 0, FTP: 1
Set the saving destination for the Scan to My Folder function.
Set the user name for the Scan to My Folder function.
Set a password to authenticate the destination folder for the Scan to My Folder
function within 32 ASCII characters.
When importing, this is set as the password instead of EncPassword. When exporting,
this is always blank.
Set the connection mode for the FTP server when FTP is selected as the Type for the
Scan to My Folder function.
Active mode: 0, Passive mode: 1
134
>
Registering User Settings