Logging In As An Administrator From The Control Panel; Disabling Authentication Settings - Epson DS-790WN Administrator's Manual

Authentication Settings

Logging in as an Administrator from the Control Panel

You can use any of the following methods to log in as an administrator from the scanner's control panel.
1. Tap
at the top right of the screen.
❏ When Authentication Settings is enabled, the icon is displayed on the Welcome screen (the authentication
standby screen).
❏ When Authentication Settings is disabled, the icon is displayed on the Home screen.
2. Tap Yes when the confirmation screen is displayed.
3. Enter the administrator's password.
A login complete message is displayed, and then the Home screen on the control panel is displayed.
To logout, tap at the top right of the Home screen.

Disabling Authentication Settings

You can disable Authentication Settings using Web Config.
Note:
The User Settings registered to the scanner will be saved even if Authentication Settings is disabled. You can remove them by
restoring the scanner to its default settings.
1. Access Web Config.
2. Select the Product Security tab > Basic > Authentication.
3. Select OFF.
4. Click Next.
5. Click OK.
Note:
Even if you disable Authentication Settings, Lock Setting remains enabled. If you want to disable it, you can make settings
from the control panel or Web Config.
Related Information
"Setting Lock Setting from the Control Panel" on page 82
&
"Setting Lock Setting from Web Config" on page 82
&
>

Disabling Authentication Settings

145