Deleting Authentication Settings Information (Restore Default Settings); Solving Problems; Cannot Read The Authentication Card - Epson DS-790WN Administrator's Manual

Authentication Settings
Deleting Authentication Settings Information
(Restore Default Settings)
To delete all Authentication Settings information (Card Reader, Authentication Method, User Settings, and so on),
restore all of the scanner settings to the default settings at the time of purchase.
Select Settings > System Administration > Restore Default Settings > All Settings on the control panel.
Important:
c
All contacts and other network settings will also be deleted. Deleted settings cannot be restored.

Solving Problems

Cannot Read the Authentication Card

Check the following.
❏ Check if the authentication device is connected to the scanner correctly.
Connect the authentication device to the external interface USB port on the back of the scanner.
❏ Check that the authentication device and the authentication card are supported.
> >

Solving Problems

Cannot Read the Authentication Card
146