Epson DS-790WN Administrator's Manual page 109

Advanced Security Settings
Setting of Remote IPv4*1
Address(Host)
IPv6*1*2
Blank
*1If IPsec is selected for Access Control, you cannot specify in a prefix length.
*2If IPsec is selected for Access Control, you can select a link-local address (fe80::) but group policy will be disabled.
*3Except IPv6 link local addresses.
Related Information
"Running Web Config on a Web Browser" on page 34
&
References of Service Name on Group Policy
Note:
Unavailable services are displayed but cannot be selected.
Service name Protocol type
Any –
ENPC UDP
SNMP UDP
WSD TCP
WS-Discovery UDP
Network Scan TCP
Network Push TCP
Scan
Network Push UDP
Scan Discovery
FTP Data TCP
(Remote)
FTP Control TCP
(Remote)
CIFS (Remote) TCP
>
Encrypted Communication Using IPsec/IP Filtering
✓
–
✓
Local port Remote port
number number
– –
3289 Any port
161 Any port
Any port 5357
3702 Any port
1865 Any port
Any port 2968
2968 Any port
Any port 20
Any port 21
Any port 445
109
>
Configuring Group Policy
✓
–
✓ ✓
✓ ✓
Features controlled
All services
Searching for a scanner from
applications such as Epson Device
Admin and the a scanner driver
Acquiring and configuring MIB from
applications such as Epson Device
Admin and the Epson scanner driver
Controlling WSD
Searching for WSD scanners
Forwarding scanned data from
Document Capture Pro
Acquiring job information for push
scanning from Document Capture Pro
Searching for a computer from scanner
FTP client (forwarding scanned data)
However this can control only an FTP
server that uses remote port number
20.
FTP client (controlling forwarded
scanned data)
CIFS client (forwarding scanned data
to a folder)