Configuration Examples Of Ipsec/Ip Filtering - Epson DS-790WN Administrator's Manual

Advanced Security Settings
Service name Protocol type
NetBIOS Name UDP
Service (Remote)
NetBIOS UDP
Datagram
Service (Remote)
NetBIOS Session TCP
Service (Remote)
HTTP (Local) TCP
HTTPS (Local) TCP
HTTP (Remote) TCP
HTTPS (Remote) TCP

Configuration Examples of IPsec/IP Filtering

Receiving IPsec packets only
This example is to configure a default policy only.
Default Policy:
❏ IPsec/IP Filtering: Enable
❏ Access Control: IPsec
❏ Authentication Method: Pre-Shared Key
❏ Pre-Shared Key: Enter up to 127 characters.
Group Policy: Do not configure.
Receiving scanning data and scanner settings
This example allows communications of scanning data and scanner configuration from specified services.
Default Policy:
❏ IPsec/IP Filtering: Enable
❏ Access Control: Refuse Access
Group Policy:
❏ Enable this Group Policy: Check the box.
❏ Access Control: Permit Access
❏ Remote Address(Host): IP address of a client
❏ Method of Choosing Port: Service Name
❏ Service Name: Check the box of ENPC, SNMP, HTTP (Local), HTTPS (Local) and Network Scan.
>
Encrypted Communication Using IPsec/IP Filtering
Local port Remote port
number number
Any port 137
Any port 138
Any port 139
80 Any port
443 Any port
Any port 80
Any port 443
110
>
Configuration Examples
Features controlled
CIFS client (forwarding scanned data
to a folder)
HTTP(S) server (forwarding data of
Web Config and WSD)
HTTP(S) client (updating the firmware
and the root certificate)
...