Setting Scan To My Folder - Epson DS-790WN Administrator's Manual

Authentication Settings
Item
Authenticated Account
Authenticated Password
Sender's Email Address
SMTP Server Address
SMTP Server Port Number
Secure Connection
Certificate Validation
POP3 Server Address
POP3 Server Port Number

Setting Scan to My Folder

Saves scanned images to the folder assigned to each user. You can set the following as a dedicated folder.
Note:
You can set Scan To My Folder only when Scan to Network Folder/FTP has been enabled.
Save To Setting
Specify one network folder for the entire
Authentication Settings to automatically create
a personal folder below the specified folder
using the name of the user ID.
Assign different network folders individually to
each user.
When setting up from Web Config:
Select the Product Security tab > Scan to Network Folder/FTP.
>
Registering and Setting Information
If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the
authenticated account name. Enter between 0 and 255 characters in ASCII (0x20 - 0x7E).
If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the
authenticated password. Enter between 0 and 20 characters in ASCII (0x20 - 0x7E).
Enter the sender's email address. Enter between 0 and 255 characters in ASCII (0x20 - 0x7E)
except for : ( ) < > [ ] ; ¥. A period ". " cannot be the first character.
Enter between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN format.
Enter a number between 1 and 65535.
Specify the secure connection method for the email server.
None
SSL/TLS
STARTTLS
The certificate is authenticated when this is enabled. We recommend setting this to Enable.
If you select POP before SMTP as the Authentication Method, enter the POP3 server
address. You can enter between 0 and 255 characters using A-Z a-z 0-9. You can use IPv4 or
FQDN format.
If you select POP before SMTP as the Authentication Method, specify the port number.
Enter a number between 1 and 65535.
Authentication Method
❏ Local DB
❏ LDAP
❏ Local DB and LDAP
Local DB
LDAP
Local DB and LDAP
142
>
Setting Scan to My Folder
Settings and Explanation
If you select POP before SMTP in Authentication Method,
the connection method is set to None.
This is available when Authentication Method is set to Off
or SMTP AUTH.
This is available when Authentication Method is set to Off
or SMTP AUTH.
Folder Path Setting Location
Scanner (Scan to My Folder
setting)
Scanner (User Settings)
LDAP Attributes
Scanner (User Settings) or LDAP
attributes