Connecting To The Network From The Control Panel - Epson DS-790WN Administrator's Manual

Network Settings
>
DNS Server and Proxy Server
The DNS server has a host name, domain name of the email address, etc. in association with the IP address
information.
Communication is impossible if the other party is described by host name, domain name, etc. when the computer
or the scanner performs IP communication.
Queries the DNS server for that information and gets the IP address of the other party. This process is called name
resolution.
Therefore, the devices such as computers and scanners can communicate using the IP address.
Name resolution is necessary for the scanner to communicate using the email function or Internet connection
function.
When you use those functions, make the DNS server settings.
When you assign the scanner's IP address by using the DHCP function of the DHCP server or router, it is
automatically set.
The proxy server is placed at the gateway between the network and the Internet, and it communicates to the
computer, scanner, and Internet (opposite server) on behalf of each of them. The opposite server communicates
only to the proxy server. Therefore, scanner information such as the IP address and port number cannot be read
and increased security is expected.
When you connect to the Internet via a proxy server, configure the proxy server on the scanner.

Connecting to the Network from the Control Panel

Connect the scanner to the network by using the scanner's control panel.
Assigning the IP Address
Set up the basic items such as Host Address, Subnet Mask, Default Gateway.
This section explains the procedure for setting a static IP address.
1. Turn on the scanner.
2. Select Settings on the home screen on the scanner's control panel.
3. Select Network Settings > Advanced > TCP/IP.
4. Select Manual for Obtain IP Address.
When you set the IP address automatically by using the DHCP function of router, select Auto. In that case, the
IP Address, Subnet Mask, and Default Gateway on step 5 to 6 are also set automatically, so go to step 7.
5. Enter the IP address.
Focus moves to the forward segment or the back segment separated by a period if you select
Confirm the value reflected on the previous screen.
6. Set up the Subnet Mask and Default Gateway.
Confirm the value reflected on the previous screen.
Connecting the Scanner to the Network
>
Connecting to the Network from the Control Panel
15
l r
and .