Using Lock Setting For The Control Panel - Epson DS-790WN Administrator's Manual

Basic Security Settings

Using Lock Setting for the Control Panel

You can use Lock Setting to lock the control panel to prevent users from changing items related to system settings.
Note:
If you enable Authentication Settings on the scanner, Lock Setting is also enabled for the control panel. The control panel
cannot be unlocked when Authentication Settings is enabled.
Even if you disable Authentication Settings, Lock Setting remains enabled. If you want to disable it, you can make settings
from the control panel or Web Config.
Setting Lock Setting from the Control Panel
1. If you want to cancel the Lock Setting once it has been enabled, tap
screen to log in as an administrator.
is not displayed when Lock Setting is disabled. If you want to enable this setting, go to the next step.
2. Select Settings.
3. Select System Administration > Admin Settings.
4. Select On or Off as the Lock Setting.
Setting Lock Setting from Web Config
1. Select the Device Management tab > Control Panel.
2. Select ON or OFF for Panel Lock.
3. Click OK.
Related Information
"Running Web Config on a Web Browser" on page 34
&
Lock Setting items on the Settings Menu
This is a list of items that are locked in the Settings menu on the control panel by Lock Setting.
✓: To be locked.
- : Not to be locked.
Settings menu
Basic Settings
> >
Administrator Settings
82
Using Lock Setting for the Control Panel
at the top right corner of the Home
Lock Setting
-