Epson DS-790WN Administrator's Manual page 11

Required Settings to Suit Your Purpose
Setting Basic Security Functions
Purpose
I want to prevent anyone other than the
administrator from changing the scanner
settings.
I want to disable the use of scanners with
USB connections.
Setting Advanced Security Functions
Purpose
I want to control which protocols to use.
I want to encrypt the communication
path.
I want to use encrypted communication
(IPsec).
I want to be able to use the software only
from a specific computer (IP filtering).
I want to use a scanner in an IEEE802.1X
network.
Setting Functions to be Authenticated by the Scanner
Purpose
I want to enable Authentication Settings.
Using a Server's Authentication System
With Document Capture Pro Server Authentication Edition (abbreviated to Document Capture Pro Server AE),
you can build an authentication system that uses a server for authentication.
For further information, contact your local Epson office.
>
Required Settings to Suit Your Purpose
Required Settings
Set an administrator password for the scanner.
"Administrator Settings" on page 80
Disable the external interface.
"Disabling the External Interface" on page 86
Required Settings
Enable or disable the protocols.
"Controlling Using Protocols" on page 91
1. Setup your digital certificate.
"Using a Digital Certificate" on page 94
2. Setup SSL/TLS communication.
"SSL/TLS Communication with the Scanner" on page 99
Setup policies for filtering traffic.
"Encrypted Communication Using IPsec/IP Filtering" on page 101
Setup IEEE802.1X for the scanner.
"Connecting the Scanner to an IEEE802.1X Network" on page 111
Required Settings
See the following for more information on the available Authentication
Settings and Authentication Method.
"About Authentication Settings" on page 121
"About Authentication Method" on page 122
11