Epson DS-790WN Administrator's Manual page 24

Network Settings
>
"Cannot connect to a Network" on page 30
Making Settings for Connecting to the Smart Device
You can use the scanner from a smart device when you connect the scanner to the same Wi-Fi network (SSID) as
the smart device. To use the scanner from a smart device, access the following website, and then enter the product
name. Go to Setup, and then start setting up.
http://epson.sn
Access to the website from the smart device that you want to connect to the scanner.
When Changing the Computer
When changing the computer, make connection settings between the computer and the scanner.
Making Settings for Connecting to the Computer
We recommend using the installer to connect the scanner to a computer. You can run the installer using the
following method.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the software disc (only for the models that come with a software disc and users with Windows
computers with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Follow the on-screen instructions.
Changing the Connection Method to the Computer
This section explains how to change the connection method when the computer and the scanner have been
connected.
Changing the Network Connection from Ethernet to Wi-Fi
Change the Ethernet connection to Wi-Fi connection from the scanner's control panel. The changing connection
method is basically the same as the Wi-Fi connection settings.
Related Information
"Connecting to the Wireless LAN (Wi-Fi)" on page 17
&
Changing the Network Connection from Wi-Fi to Ethernet
Follow the steps below to change from a Wi-Fi connection to an Ethernet connection.
1. Select Settings on the home screen.
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
24