Epson DS-790WN Administrator's Manual page 81

Basic Security Settings
2. Enter the necessary information in Current password, User Name, New Password, and Confirm New
Password.
Enter at least one character for the new password.
Note:
The following provides the default values for the administrator information.
❏ User name: none (blank)
❏ Password: serial number of the scanner
To find the serial number, check the label attached to the rear of the scanner.
Important:
c
Be sure to remember the administrator password you set. If you forget your password, you will not be able to
reset it and you will need to request help from service personnel.
3. Select OK.
Related Information
"Running Web Config on a Web Browser" on page 34
&
Changing the Administrator Password from the Control Panel
You can change the administrator password from the scanner's control panel.
1. Select Settings on the scanner's control panel.
2. Select System Administration > Admin Settings.
3. Select Admin Password > Change.
4. Enter your current password.
Note:
The setting at the time of purchase (default value) for the administrator password is the serial number of the scanner.
To find the serial number, check the label attached to the rear of the scanner.
5. Enter your new password.
Enter at least one character.
Important:
c
Be sure to remember the administrator password you set. If you forget your password, you will not be able to
reset it and you will need to request help from service personnel.
6. Enter the new password again for confirmation.
A completion message is displayed.
> >
Administrator Settings
81
Configuring the Administrator Password