Epson DS-790WN Administrator's Manual page 137

Authentication Settings
4. Click Settings.
The LDAP Server settings are displayed.
Note:
This LDAP server setting is for importing the user settings from the LDAP server. The imported (copied) user settings
are used to authenticate users by using the scanner itself.
On the other hand, when you select LDAP or Local DB and LDAP as the authentication method, users are
authenticated by communicating with the LDAP server.
5. Set each item.
When importing user settings from an LDAP server, you can also configure the following settings in addition
to the LDAP settings.
For other items, see Related Information.
LDAP Server Settings
Search Settings
6. Perform the connection test as necessary by clicking Connection Test.
Acquires and displays 10 user settings from the LDAP server.
7. Click OK.
8. Select an import method.
❏ Overwrite and Add: Overwrites if the same user ID exists; adds a new ID if it does not exist.
❏ Replace All: Replaces everything with the user settings you want to import.
9. Click Import.
The setting confirmation screen is displayed.
10. Click OK.
The validation result is displayed.
11. Click Import.
The user settings are imported into the configuration template.
Related Information
"Configuring an LDAP Server" on page 138
&
>
Registering and Setting Information
Item
LDAP Server Type
Search Filter
Options Type
Connection
Mode
Port Number
>
Registering User Settings
Explanation
Allows you to select the type of LDAP server.
You can set the text used for the LDAP search filter. Select
Custom to edit the search text.
You can set the type of save destination for Scan To My
Folder.
When the Type is set to FTP, you can set the FTP connection
mode.
When the Type is set to FTP, you can set the port number you
want to use.
137