Epson DS-790WN Administrator's Manual page 135

Authentication Settings
Item
FtpPort
ScanToMemory
ScanToMail
ScanToFolder
ScanToCloud
ScanToComputer
PresetIndex
EncPassword
EncFolderPassword
Importing a CSV File
1. Access Web Config and select the Product Security tab > User Settings.
2. Click Import.
3. Select the file you want to import.
4. Click Import.
5. After checking the displayed information, click OK.
>
Registering and Setting Information
Settings and Explanation
Set the port number for sending scanned data to the FTP server from 0 to 65535 when
FTP is selected as the Type for the Scan to My Folder function.
Set the restrictions for Scan to USB Drive.
Not Allowed: 0, Allowed: 1
Set the restrictions for Scan to Email.
You can set Scan to My Email only when Scan to Email has been enabled.
Not Allowed: 0, Allowed: 1
Set the restrictions for Scan to Network Folder/FTP.
You can set Scan to My Folder only when Scan to Network Folder/FTP has been
enabled.
Not Allowed: 0, Allowed: 1
Set the restrictions for Scan to Cloud.
Not Allowed: 0, Allowed: 1
Set the restrictions for Scan to Computer.
Not Allowed: 0, Allowed: 1
Set the Presets that you want to associate with the user. You can set up to five Presets
registration numbers separated by commas.
When exporting user settings, the parameter set for Password is encrypted, then the
value is encoded by BASE64 and output.
When importing with the new password for Password, this value is ignored.
If Password is blank, this value is used and the password remains as it was before
exporting.
When exporting the parameter set for FolderPassword is encrypted, then the value is
encoded by BASE64 and output.
When importing with the new password for FolderPassword, this value is ignored.
If FolderPassword is blank, this value is used and the password remains as it was
before exporting.
135
>
Registering User Settings