Web Config; Running Web Config On A Web Browser; Running Web Config On Windows - Epson DS-790WN Administrator's Manual

Software for Setting Up the Scanner

Web Config

Web Config is an application that runs in web browsers such as Internet Explorer and Safari on a computer. You
can confirm the scanner status or change the network service and scanner settings. Since the scanners are accessed
and operated directly from the network, it is suitable for setting up one scanner at a time. To use Web Config,
connect your computer to the same network as the scanner.
The following browsers are supported.
Microsoft Edge, Windows Internet Explorer 8 or later, Firefox
* Use the latest version.

Running Web Config on a Web Browser

1. Check the scanner's IP address.
Select Settings > Network Settings > Network Status on the scanner's control panel. Then select the active
connection method status (Wired LAN/Wi-Fi Status or Wi-Fi Direct Status) to confirm the scanner's IP
address.
2. Launch a Web browser from a computer or smart device, and then enter the scanner's IP address.
Format:
IPv4: http://the scanner's IP address/
IPv6: http://[the scanner's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Since the scanner uses a self-signed certificate when accessing HTTPS, a warning is displayed on the browser when you
start Web Config; this does not indicate a problem and can be safely ignored.
3. Login as an administrator to change the scanner settings.
Click Log in at the top-right of the screen. Enter the User Name and Current password, and then click OK.
Note:
❏ The following provides the initial values for the Web Config administrator information.
·User name: none (blank)
·Password: serial number of the scanner
To find the serial number, check the label attached to the rear of the scanner.
❏ If Log out is displayed at the top-right of the screen, you have already logged-on as an administrator.

Running Web Config on Windows

When connecting a computer to the scanner using WSD, follow the steps below to run Web Config.
> >
Web Config Running Web Config on Windows
* *
, Chrome , Safari
34
*