Configuring A Certificate For Ipsec/Ip Filtering; Connecting The Scanner To An Ieee802.1X Network; Configuring An Ieee802.1X Network - Epson DS-790WN Administrator's Manual

Advanced Security Settings
Receiving access from a specified IP address only
This example allows a specified IP address to access the scanner.
Default Policy:
❏ IPsec/IP Filtering: Enable
❏ Access Control:Refuse Access
Group Policy:
❏ Enable this Group Policy: Check the box.
❏ Access Control: Permit Access
❏ Remote Address(Host): IP address of an administrator's client
Note:
Regardless of policy configuration, the client will be able to access and configure the scanner.

Configuring a Certificate for IPsec/IP Filtering

Configure the Client Certificate for IPsec/IP Filtering. When you set it, you can use the certificate as an
authentication method for IPsec/IP Filtering. If you want to configure the certification authority, go to CA
Certificate.
1. Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Client Certificate.
2. Import the certificate in Client Certificate.
If you have already imported a certificate published by a Certification Authority, you can copy the certificate
and use it in IPsec/IP Filtering. To copy, select the certificate from Copy From, and then click Copy.
Related Information
"Running Web Config on a Web Browser" on page 34
&
"Configuring a CA-signed Certificate" on page 94
&
"Configuring a CA Certificate" on page 98
&

Connecting the Scanner to an IEEE802.1X Network

Configuring an IEEE802.1X Network

When you set IEEE802.1X to the scanner, you can use it on the network connected to a RADIUS server, a LAN
switch with authentication function, or an access point.
1. Access Web Config and then select the Network Security tab > IEEE802.1X > Basic.
2. Enter a value for each item.
If you want to use the scanner on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.
Note:
You can share settings between Ethernet and Wi-Fi.
>

Connecting the Scanner to an IEEE802.1X Network

111
> ...
Configuring an IEEE802.