Encrypted Communication Using Ipsec/Ip Filtering; About Ipsec/Ip Filtering; Configuring Default Policy - Epson DS-790WN Administrator's Manual

Advanced Security Settings

Encrypted Communication Using IPsec/IP Filtering

About IPsec/IP Filtering

You can filter traffic based on IP addresses, services, and port by using IPsec/IP Filtering function. By combining of
the filtering, you can configure the scanner to accept or block specified clients and specified data. Additionally, you
can improve security level by using an IPsec.
Note:
Computers that run Windows Vista or later or Windows Server 2008 or later support IPsec.

Configuring Default Policy

To filter traffic, configure the default policy. The default policy applies to every user or group connecting to the
scanner. For more fine-grained control over users and groups of users, configure group policies.
1. Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Basic.
2. Enter a value for each item.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The scanner is updated.
Related Information
"Running Web Config on a Web Browser" on page 34
&
Default Policy Setting Items
Default Policy
Items
IPsec/IP Filtering
❏ Access Control
Configure a control method for traffic of IP packets.
Items
Permit Access
Refuse Access
IPsec
>

Encrypted Communication Using IPsec/IP Filtering

Settings and Explanation
You can enable or disable an IPsec/IP Filtering feature.
Settings and Explanation
Select this to permit configured IP packets to pass through.
Select this to refuse configured IP packets to pass through.
Select this to permit configured IPsec packets to pass through.
101
>
Configuring Default Policy