Security Feature Settings; Controlling Using Protocols; Controlling Protocols; Protocols You Can Enable Or Disable - Epson DS-790WN Administrator's Manual

Advanced Security Settings

Security Feature Settings

When setting IPsec/IP filtering or IEEE802.1X, it is recommended that you access Web Config using SSL/TLS to
communicate settings information in order to reduce security risks such as tampering or interception.
Make sure you configure the administrator password before setting IPsec/IP filtering or IEEE802.1X.

Controlling Using Protocols

You can scan using a variety of pathways and protocols. Also, you can use network scanning from an unspecified
number of network computers.
You can lower unintended security risks by restricting scanning from specific pathways or by controlling the
available functions.

Controlling protocols

Configure the protocol settings supported by the scanner.
1. Access Web Config and then select the Network Security tab > Protocol.
2. Configure each item.
3. Click Next.
4. Click OK.
The settings are applied to the scanner.
Related Information
"Running Web Config on a Web Browser" on page 34
&

Protocols you can Enable or Disable

Protocol
Bonjour Settings
SLP Settings
WSD Settings
LLTD Settings
LLMNR Settings
>

Controlling Using Protocols

Description
You can specify whether to use Bonjour. Bonjour is used to search for devices, scan, and so on.
You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet Config.
You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and scan from the WSD port.
You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
>
Protocols you can Enable or Disable
91