Registering User Settings - Epson DS-790WN Administrator's Manual

Authentication Settings
Item
Authentication
Method
How to Authenticate
User
Allow users to register
authentication cards
The Minimum Digit
Number of ID Number
Caching for LDAP
authenticated users
Use user information
in SMTP
authentication
Restrictions for LDAP
authenticated users

Registering User Settings

Register the User Settings used for user authentication. You can register using any of the following methods.
❏ Registering User Settings One by One (Web Config)
>
Registering and Setting Information
Explanation
Select the Authentication Method.
❏ Local DB
Authenticate using the User Settings registered to the scanner. It is necessary to register the
user to the scanner.
❏ LDAP
Authenticate using the user information on the LDAP server synchronized with the scanner.
You need to configure the LDAP server settings beforehand.
❏ Local DB and LDAP
Authenticate using the user information registered to the scanner or the LDAP server
synchronized with the scanner. You need to register the user to the scanner and set up the
LDAP server.
Select how to authenticate a user.
❏ Card or User ID and Password
Use an authenticate card to authenticate users. You can also use a user ID and password to
authenticate.
❏ User ID and Password
Use a user ID and password to authenticate users.
You cannot use an authenticate card to authenticate when you select this function.
❏ User ID
Use only a user ID to authenticate users. You do not need to set a password.
❏ Card or ID Number
Use an authenticate card to authenticate users. You can also use an ID Number.
❏ ID Number
Use only an ID Number to authenticate users.
Enable it if you allow users to register the authentication card to the system.
If you select LDAP for Authentication Method, you cannot set it.
For more information on how users can register their authentication cards, see "Registering an
Authentication Card" in the User's Guide.
Select the minimum number of digits for the ID number.
When using LDAP server authentication, you can set whether or not to use caching for user
information.
When using a user ID and password for authentication, you can set whether or not to use user
information for SMTP authentication. The system uses the last user ID and password that were
logged in.
If you are using LDAP, you can set the functions that are available to the user.
>
Registering User Settings
131