Epson DS-790WN Administrator's Manual page 132

Authentication Settings
❏ Registering Multiple User Settings as a Batch Using a CSV File (Web Config)
❏ Registering User Settings to Multiple Scanners as a Batch Using a Configuration Template (Epson Device
Admin)
Related Information
"Registering User Settings Individually (Web Config)" on page 132
&
"Registering Multiple User Settings Using a CSV file (Web Config)" on page 133
&
"Registering User Settings to Multiple Scanners as a Batch (Epson Device Admin)" on page 136
&
Registering User Settings Individually (Web Config)
Access Web Config and select the Product Security tab > User Settings > Add, and then enter the User Settings.
Item
User ID
User name Display
Password
Authentication Card ID
ID Number
Auto Generate
Department
Email Address
>
Registering and Setting Information
Explanation
Enter the user ID you want to use for authentication within a range of 1 to 83
bytes that can be expressed in Unicode (UTF-8).
Since the user ID is not case sensitive, you can login using upper or lower case
letters.
Enter the user name displayed on the scanner's control panel within 32 characters
that can be expressed in Unicode (UTF-16). You can leave this blank.
Enter the password you want to use for authentication within 32 characters in
ASCII. The password is case sensitive.
Leave this blank if you select User ID for How to Authenticate User.
Enter the authentication card ID within 116 characters in ASCII. You can leave this
blank.
When you permit Allow users to register authentication cards for
Authentication Settings, the result registered by users is reflected.
This item is displayed when Card or ID Number or ID Number is selected in
Authentication Settings > How to Authenticate User.
Enter a number that falls somewhere between the number set in Authentication
Settings > The Minimum Digit Number of ID Number and is up to 8 digits.
This item is displayed when Card or ID Number or ID Number is selected in
Authentication Settings > How to Authenticate User.
Click to automatically generate an ID number with the same number of digits you
selected in The Minimum Digit Number of ID Number.
Enter the department name and so on that identifies the user within 40 characters
that can be expressed in Unicode (UTF-16).
You can leave this blank.
Enter the user's email address within 200 characters in ASCII. This is used as the
destination for Scan to My Email.
You can leave this blank.
132
>
Registering User Settings