Updating Applications And Firmware; Updating The Scanner's Firmware Using The Control Panel - Epson DS-790WN Administrator's Manual

Maintenance
>

Updating Applications and Firmware

Important:
c
If you select and run All Settings, all setting data registered to the scanner including the contacts and the
authentication user settings will be deleted. Deleted settings cannot be restored.

Updating Applications and Firmware

You may be able to clear certain problems and improve or add functions by updating the applications and the
firmware. Make sure you use the latest version of the applications and firmware.
Important:
c
❏ Do not turn off the computer or the scanner while updating.
Note:
When the scanner can connect to the Internet, you can update the firmware from Web Config. Select the Device
Management tab > Firmware Update, check the displayed message, and then click Start.
1. Make sure that the scanner and the computer are connected, and the computer is connected to the internet.
2. Start EPSON Software Updater, and update the applications or the firmware.
Note:
Windows Server operating systems are not supported.
❏ Windows 10
Click the start button, and then select Epson Software > EPSON Software Updater.
❏ Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏ Windows 7
Click the start button, and then select All Programs or Programs > Epson Software > EPSON Software
Updater.
❏ Mac OS
Select Finder > Go > Applications > Epson Software > EPSON Software Updater.
Note:
If you cannot find the application you want to update in the list, you cannot update using the EPSON Software Updater.
Check for the latest versions of the applications on your local Epson website.
http://www.epson.com

Updating the Scanner's Firmware using the Control Panel

If the scanner can be connected to the Internet, you can update the scanner's firmware using the control panel. You
can also set the scanner to regularly check for firmware updates and notify you if any are available.
1. Select Settings on the home screen.
>
Updating the Scanner's Firmware using the Control Panel
162