Adding Or Replacing The Computer Or Devices; Connecting To A Scanner That Has Been Connected To The Network - Epson DS-790WN Administrator's Manual

Network Settings
>
1. Tap
on the home screen.
2. Select Router.
3. Tap Start Setup.
If the network connection is already set up, the connection details are displayed. Tap Change to Wi-Fi
connection. or Change Settings to change the settings.
4. Select Others > PIN Code Setup(WPS)
5. Follow the on-screen instructions.
If you want to check the network connection status for the scanner after setup is complete, see the related
information link below for details.
Note:
See the documentation provided with your wireless router for details on entering a PIN code.
Related Information
"Checking the Network Connection Status" on page 25
&

Adding or Replacing the Computer or Devices

Connecting to a Scanner that has been Connected to the Network

When the scanner has already been connected to the network, you can connect a computer or a smart device to the
scanner over the network.
Using a Network Scanner from a Second Computer
We recommend using the installer to connect the scanner to a computer. You can run the installer using one of the
following methods.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the software disc (only for the models that come with a software disc and users with Windows
computers with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.

Adding or Replacing the Computer or Devices

>
Connecting to a Scanner that has been Con
19
...