Registering And Setting Information; Setting Up - Epson DS-790WN Administrator's Manual

Authentication Settings

Registering and Setting Information

Setting Up

Make the necessary settings depending on the Authentication Method and the scanning method you use.
Important:
c
Before starting the setup, check that the time setting for the scanner is correct.
If the time setting is incorrect, the error message "License is expired" is displayed, which may lead to failure to set up
the scanner. Also, in order to use a security function such as SSL/ TLS communication or IPsec, the correct time
must be set. You can set the time as follows.
❏ Web Config: Device Management tab > Date and Time > Date and Time.
❏ Scanner's control panel: Settings > Basic Settings > Date/Time Settings.
Settings
Enabling authentication
You need to enable authentication before making
authentication settings.
"Enabling Authentication" on page 130
Authentication Settings
Setting the Authentication Method and how to authenticate
the user.
"Authentication Settings" on page 130
Registering User Settings
Register the settings for each user. You can also register
users in bulk by using a CSV file.
"Registering User Settings" on page 131
Synchronizing with the LDAP Server
Make the LDAP server synchronization settings.
"Synchronizing with the LDAP Server" on page 138
Setting the Email Server
Set the email server settings. Set this when using functions
that requires email server settings such as Scan to My Email.
"Setting the Email Server" on page 141
Setting Scan to My Folder
Set the destination folders. Set this when using the Scan to
My Folder function.
"Setting Scan to My Folder" on page 142
>

Registering and Setting Information

129
>
Setting Up
Local DB LDAP
✓ ✓
✓ ✓
✓
–
✓
–
✓ ✓
✓ ✓
Local DB and
LDAP
✓
✓
✓
✓
✓
✓