Ssl/Tls Communication With The Scanner; Configuring Basic Ssl/Tls Settings - Epson DS-790WN Administrator's Manual

Advanced Security Settings
Importing a CA Certificate
Import the CA Certificate to the scanner.
1. Access Web Config and then select the Network Security tab > CA Certificate.
2. Click Import.
3. Specify the CA Certificate you want to import.
4. Click OK.
When importing is complete, you are returned to the CA Certificate screen, and the imported CA Certificate is
displayed.
Related Information
"Running Web Config on a Web Browser" on page 34
&
Deleting a CA Certificate
You can delete the imported CA Certificate.
1. Access Web Config and then select the Network Security tab > CA Certificate.
2. Click Delete next to the CA Certificate that you want to delete.
3. Confirm that you want to delete the certificate in the message displayed.
4. Click Reboot Network, and then check that the deleted CA Certificate is not listed on the updated screen.
Related Information
"Running Web Config on a Web Browser" on page 34
&

SSL/TLS Communication with the Scanner

When the server certificate is set using SSL/TLS (Secure Sockets Layer/Transport Layer Security) communication
to the scanner, you can encrypt the communication path between computers. Do this if you want to prevent
remote and unauthorized access.

Configuring Basic SSL/TLS Settings

If the scanner supports the HTTPS server feature, you can use an SSL/TLS communication to encrypt
communications. You can configure and manage the scanner using Web Config while ensuring security.
Configure encryption strength and redirect feature.
1. Access Web Config and select the Network Security tab > SSL/TLS > Basic.
>

SSL/TLS Communication with the Scanner

99
>
Configuring Basic SSL/TLS Settings