Basic Security Settings
3. Enter the email address for sending the notification email.
Use A-Z a-z 0-9 ! # $ % & ' * + - . /= ? ^ _ { | } ~ @, and enter between 1 and 255 characters.
4. Select the language for the email notifications.
5. Select the check box on the event for which you want to receive a notification.
The number of Notification Settings is linked to the destination number of Email Address Settings.
Example :
If you want to send a notification to the email address set for number 1 in Email Address Settings when the
admin password is changed, select the check box for column 1 on the line Administrator password changed.
6. Click OK.
Confirm that an email notification will be sent by causing an event.
Example : The administrator password has been changed.
Related Information
"Running Web Config on a Web Browser" on page 34
&
Items for Email Notification
Items
Administrator password changed
Scanner error
Wi-Fi failure
Solving Problems
Forgot Your Administrator's Password
You need help from service personnel. Contact your local dealer.
Note:
The following provides the initial values for the Web Config administrator.
❏ User name: none (blank)
❏ Password: serial number of the scanner
To find the serial number, check the label attached to the rear of the scanner. If you restore the default settings for the
administrator password, it is reset to the initial values.
>
>
Solving Problems
Forgot Your Administrator's Password
Notice when administrator password has been changed.
Notice when the scanner error has occurred.
Notice when the error of the wireless LAN interface has occurred.
88
Settings and Explanation