Software For Setting Up; Updating The Scanner's Firmware; Connecting And Configuring An Authentication Device; Card Reader Compatible List - Epson DS-790WN Administrator's Manual

Authentication Settings

Software for Setting Up

Set up using Web Config or Epson Device Admin.
❏ When you use Web Config, you can set up the scanner only by using a web browser.
"Web Config" on page 34
❏ When you use Epson Device Admin, you can set up multiple scanners at once using a configuration template.
"Epson Device Admin" on page 35

Updating the Scanner's Firmware

Before enabling Authentication Settings, update the scanner's firmware to the latest version. Connect the scanner
to the Internet in advance.
Important:
c
Do not turn off the computer or the scanner while updating.
When setting up from Web Config:
Select the Device Management tab > Firmware Update, and then follow the on-screen instructions to update the
firmware.
When setting up from Epson Device Admin:
Select Home > Firmware > Update on the device list screen, and then follow the on-screen instructions to update
the firmware.
Note:
If the latest firmware is already installed, you do not need to update.

Connecting and Configuring an Authentication Device

If you want to connect and use an authentication device such as an IC card reader, you first need to configure the
device. This is not necessary if you are not using an authentication device.
Related Information
"Connecting Authentication Device" on page 127
&
"Authentication Device Settings" on page 128
&

Card Reader Compatible List

This list does not guarantee operations for the card readers in the list.
Yes: Supported (The ID information can be read with standard card reader settings.)
No: Not Compatible
>

Connecting and Configuring an Authentication Device

124
>
Card Reader Compatible List