Epson DS-790WN Administrator's Manual page 140

Authentication Settings
Configuring the LDAP Server Search Settings
Sets the search attributes for user settings.
When setting up from Web Config:
Select the Network tab > LDAP Server > Search Settings (Authentication).
When setting up from Epson Device Admin:
Select Administrator Settings > Authentication Settings > LDAP server > Search Settings (Authentication)
from the configuration template.
Item
Search Base (Distinguished Name)
User ID Attribute
User name Display Attribute
Authentication Card ID Attribute
ID Number Attribute
Department Attribute
Email Address Attribute
Save To Attribute
Checking the LDAP Server Connection
Performs the connection test to the LDAP server by using the parameter set on LDAP Server > Search Settings.
1. Access Web Config and select the Network tab > LDAP Server > Connection Test.
>
Registering and Setting Information
Settings and Explanation
Specify the start position when searching for user information from the LDAP
server. Enter between 0 and 128 characters in Unicode (UTF-8). If you do not
search for arbitrary attribute, leave this blank.
Example for the local server directory: dc=server,dc=local
Specify the attribute name to display when searching for the ID number. Enter
between 1 and 255 characters in ASCII. The first character should be a-z or A-Z.
Example: cn, uid
Specify the attribute name to display as the user name. Enter between 0 and 255
characters in ASCII. The first character should be a-z or A-Z. You can leave this
blank.
Example: cn, name
Specify the attribute name to display as the authentication card ID. Enter between
0 and 255 characters in ASCII. The first character should be a-z or A-Z. You can
leave this blank.
Example: cn, sn
Specify the attribute name to display when searching for the ID number. Enter
between 1 and 255 characters in ASCII. The first character should be a-z or A-Z.
Example: cn, id
Specify the attribute name to display as the department name. Enter between 0
and 255 characters in ASCII. The first character should be a-z or A-Z. You can leave
this blank.
Example: ou, ou-cl
Specify the attribute name to display when searching for email addresses. Enter
between 1 and 255 characters in ASCII. The first character should be a-z or A-Z.
Example: mail
Specify the attribute name that points to the destination for Scan To My Folder.
Enter between 0 and 255 characters in ASCII.
Example: homeDirectory
140
>
Synchronizing with the LDAP Server