Roller Assembly Kit Codes; Resetting The Number Of Scans; Energy Saving - Epson DS-790WN Administrator's Manual

Maintenance
>

Energy Saving

Roller Assembly Kit Codes

Parts (the pickup roller and separation roller) should be replaced when the number of scans exceeds the service
number. You can check the latest number of scans on the control panel or in the Epson Scan 2 Utility.
A: pickup roller, B: separation roller
Part name
Roller Assembly Kit
* This number was reached by consecutively scanning using Epson test original papers, and is a guide to the replacement
cycle. The replacement cycle may vary depending on different paper types, such as paper that generates a lot of paper dust
or paper with a rough surface that may shorten the life cycle.

Resetting the Number of Scans

Reset the number of scans after replacing the roller assembly kit.
1. Select Settings > Device Information > Reset the Number of Scans > Number of Scans After Replacing
Roller from the home screen.
2. Tap Yes.
Related Information
"Replacing the Roller Assembly Kit" on page 153
&

Energy Saving

You can save energy by using sleep mode or auto power off mode when no operations are performed by the
scanner. You can set the time period before the scanner enters sleep mode and turns off automatically. Any
increase will affect the product's energy efficiency. Consider the environment before making any changes.
1. Select Settings on the home screen.
2. Select Basic Settings.
Codes
B12B819671
B12B819681 (India only)
158
Life cycle
*
200,000