Backing Up The Settings; Export The Settings; Import The Settings - Epson ES-C380W User Manual

Administrator Information
Items
Scanner error
Wi-Fi failure

Backing Up the Settings

You can export the setting value set from Web Config to the file. You can use it for backing up the setting values,
replacing the scanner, etc.
The exported file cannot be edited because it is exported as a binary file.

Export the settings

Export the setting for the scanner.
1. Access Web Config, and then select the Device Management tab > Export and Import Setting Value >
Export.
2. Select the settings that you want to export.
Select the settings you want to export. If you select the parent category, subcategories are also selected.
However, subcategories that cause errors by duplicating within the same network (such as IP addresses and so
on) cannot be selected.
3. Enter a password to encrypt the exported file.
You need the password to import the file. Leave this blank if you do not want to encrypt the file.
4. Click Export.
Important:
c
If you want to export the scanner's network settings such as the device name and IPv6 address, select Enable to
select the individual settings of device and select more items. Only use the selected values for the replacement
scanner.
Related Information
"How to Run Web Config in a Web Browser" on page 36
&

Import the settings

Import the exported Web Config file to the scanner.
Important:
c
When importing values that include individual information such as a scanner name or IP address, make sure the
same IP address does not exist on the same network.
> >

Backing Up the Settings

Notice when the scanner error has occurred.
Notice when the error of the wireless LAN interface has occurred.
248
Import the settings
Settings and Explanation