Epson DS-790WN Administrator's Manual page 112

Advanced Security Settings
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The scanner is updated.
Related Information
"Running Web Config on a Web Browser" on page 34
&
IEEE802.1X Network Setting Items
Items
IEEE802.1X (Wired LAN)
IEEE802.1X (Wi-Fi)
Connection Method
EAP Type
User ID
Password
Confirm Password
Server ID
Certificate Validation
Anonymous Name
>
Connecting the Scanner to an IEEE802.1X Network
You can enable or disable settings of the page (IEEE802.1X > Basic) for IEEE802.1X (Wired
LAN).
The connection status of IEEE802.1X (Wi-Fi) is displayed.
The connection method of a current network is displayed.
Select an option for an authentication method between the scanner and a RADIUS server.
EAP-TLS
PEAP-TLS
PEAP/MSCHAPv2
EAP-TTLS
Configure an ID to use for an authentication of a RADIUS server.
Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters.
Configure a password to authenticate the scanner.
Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters. If you are using a Windows server as a
RADIUS server, you can enter up to 127 characters.
Enter the password you configured for confirmation.
You can configure a server ID to authenticate with a specified RADIUS server. Authenticator
verifies whether a server ID is contained in the subject/subjectAltName field of a server
certificate that is sent from a RADIUS server or not.
Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters.
You can set certificate validation regardless of the authentication method. Import the
certificate in CA Certificate.
If you select PEAP-TLS or PEAP/MSCHAPv2 for EAP Type, you can configure an anonymous
name instead of a user ID for a phase 1 of a PEAP authentication.
Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters.
112
Settings and Explanation
You need to obtain and import a CA-signed certificate.
You need to configure a password.
> ...
Configuring an IEEE802.