Epson DS-790WN Administrator's Manual page 136

Authentication Settings
Registering User Settings to Multiple Scanners as a Batch (Epson Device
Admin)
You can register User Settings used in Local DB as a batch by using an LDAP server or a CSV/ENE file.
Note:
An ENE file is a binary file provided by Epson that encrypts and saves information for Contacts such as personal
information and User Settings. It can be exported from Epson Device Admin and you can set a password. It is useful when
you want to import the User Settings from a backup file.
Importing from CSV / ENE File
1. Select Administrator Settings > Authentication Settings > User Settings from the configuration template.
2. Click Import.
3. Select CSV or ENE File from Import Source.
4. Click Browse.
The file selection screen is displayed.
5. Select the file you want to import to open it.
6. Select an import method.
❏ Overwrite and Add: Overwrites if the same user ID exists; adds a new ID if it does not exist.
❏ Replace All: Replaces everything with the user settings you want to import.
7. Click Import.
The setting confirmation screen is displayed.
8. Click OK.
The validation result is displayed.
Note:
❏ If the number of imported user settings exceeds the number that can be imported, a message will prompt you to
delete some user settings. Delete any excess user settings before importing.
❏ Select the user settings you want to delete before importing, and then click Delete.
9. Click Import.
The user settings are imported into the configuration template.
Importing from the LDAP Server
1. Select Administrator Settings > Authentication Settings > User Settings from the configuration template.
2. Click Import.
3. Select LDAP from Import Source.
>
Registering and Setting Information
136
>
Registering User Settings