Setting Up Client Computers With Epson Scan Settings - Epson DS-560 User Manual

DS-560 User's Guide
Note:
Install the latest firmware for the Network Interface Unit before scanning. Go to the Epson website to download the Epson
Firmware Updater for the Network Interface Unit.
<http://www.epson.com/>
After downloading, start Epson Firmware Updater, and then follow the on-screen instructions. If the latest firmware is
already installed on the Network Interface Unit, you do not need to update the firmware.
After setting up the Network Interface Unit.
"Setting Up Client Computers with Epson Scan Settings" on page 39
&

Setting Up Client Computers with Epson Scan Settings

Make sure your scanner and Network Interface Unit are turned on and working properly. Then follow the steps below
to use the Epson Scan Settings program to enable network scanning.
Note:
(Windows)
Log in as a user with administrator's authority to install the software. If you are asked to enter an administrator's password,
enter the password, and then continue with the operations.
Note:
(Mac OS X)
❏ Do not use the Fast User Switching function while using your scanner.
❏ You must log on to a Computer Administrator account.
A
Obtain the IP address or host name of the Network Interface Unit from your network administrator.
B
Start Epson Scan Settings.
Windows 8.1/ Windows 8:
Start screen > Apps > EPSON > EPSON Scan Settings
Windows 7/ Windows Vista/ Windows XP:
Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings
Mac OS X:
Select Applications > EPSON Software > EPSON Scan Settings.
C
Select your scanner from the Select Scanner drop-down list.
Using the Network Interface Unit
39