Scan To Email Feature Work Flow; Scan To Network Folder/Ftp Feature Work Flow - Epson ES-C380W User Manual

Hide thumbs Also See for ES-C380W:
Table of Contents

Advertisement

Scanning
>
Preparing to Scan from the Control Panel (the Scan to Features)
*Epson Connect services are subject to change without notice.

Scan to Email Feature Work Flow

There are two ways you can send scanned images to a specified email address; by setting up an email server or by
using the Epson Connect cloud service.
"To Send by Email" on page 99
The following explains how to setup an email server to send scanned images by email.
Necessary Operations
1. Connect the scanner to the network
(This is unnecessary if you connected
to the network during setup)
2. Register your email server
information to the scanner
3. Check the email server connection
4. Register the recipient's email
address in Contacts
5. Scan from the control panel

Scan to Network Folder/FTP Feature Work Flow

This section uses making settings for Network Folder (SMB) as an example.
Operation
Explanations
Location
Scanner and
Connect the scanner to the network using the installer.
computer
Access the following website, and then enter the product
name on the screen displayed. Go to Setup, and then start
setting up.
https://epson.sn
When the connection method selection screen is displayed,
select wireless LAN (Wi-Fi) and follow the on-screen
instructions to connect to the network.
Note:
❏ When you use the installer, the software is installed at
the same time.
❏ You can also set this manually. (for administrators)
"Connecting the Scanner to the Network" on page 236
Computer (Web
The Scan to Email feature allows you to send scanned
Config) or the
images through an email server. Register the email server
scanner's control
information to the scanner.
panel
"Registering an Email Server" on page 146
Computer (Web
Test the email server connection.
Config) or the
"Checking an Email Server Connection" on page 148
scanner's control
panel
Computer (Web
Register the recipient's email address in the scanner's
Config) or the
Contacts. This allows you to select the recipient from
scanner's control
Contacts without having to enter their email address when
panel
scanning.
"Registering a Destination (Email)" on page 150
Scanner's control
Perform scanning from the control panel.
panel
"Scanning Originals to an Email" on page 113
102
>
Scan to Network Folder/FTP Feature Wo
...

Advertisement

Table of Contents
loading

Table of Contents