Receiving Phone Calls And Documents Manually (Manual Reception) - Canon FAXPHONE B75 Manual

Receiving documents
r Receiving phone calls and documents manually
(manual reception)
Check the nuro and ANS HooK up lamps.
They should both be off. lf either lamp is on,
pressthe w-uF]
key until
they are both off.
When the telephone rings, pick up the
handset. You may talk.
After you talk, if you want to receive a
document, go to the next step.
-or-
lf you hear a tone, this means someone is
trying to send you a document. Go to the
next step.
-or-
After you pick up the handset and say
"Hello", if no one answers, this means
someone is trying to send you a document
transmission without the CNG signal. Go to
the next step.
. The CNG signal that triggers automatic receiving on your
fax is always sent if the other pafty uses One-touch or
Coded speed dialing. The CNG signal is generated by the
majority of facsimile machines in use. However, if the
other party picks up the handset and dials your fax
manually to send you a document, the CNG signal is not
generated. Some facsimile machines cannot send the
CNG slona/.
4 To receive the fax, press lrrrFT-7Topn.
5 Hang up the handset.
After the received document is printed, the
fax returns automatically to standby.
1 2 / 3 1 / 9 3
1 3 : 5 8
. The fax beeps once to tell you that your document has
been received.
. lf an error occurs, the fax beeps intermittently for a few
seconds. lf this happens, contact the other party and
requestthatthey send the document again
58