Table of Contents
Advertisement
Start / Scan
3.
Receiving a Document Manually with an Extension
Telephone
You can connect one extension telephone to the facsimile unit. (➞2-40)
When the telephone rings with the fax in the manual receive mode, you
can use the extension telephone to start receiving the document without
walking over to the fax machine. This is called remote receiving.
1. Make sure the extension telephone is connected properly. (➞2-40)
Manual RX
2.
3. When the connected extension phone rings, pick up the handset.
You can change the number for the remote receiving ID (00 to 99) or turn
the feature off. (➞7-9)
7-8
Receiving Documents
Press
to start receiving the document. Then hang up the
Start/Scan
handset by placing it back in the handset cradle. The fax will start
to receive the document.
The fax will make a beeping sound if the handset is not com-
pletely on its handset cradle. This is called the offhook alarm. The
offhook alarm can be turned off. (➞16-6)
Check the operation panel and make sure the fax is in the manual
receive mode. The Manual RX indicator should be on. If it is off,
press
to turn on the indicator and switch the fax into the
Manual RX
manual receive mode.
If you hear someone on the line, you can start talking to the other
party.
-if not-
If you hear a slow beep, dial 25 on the extension telephone and
hang up to start receiving the document.
Chapter 7
Advertisement
Table of Contents
